M17 G3 O-Ring Kit | Milsig
R350.00
Milsig M17 G3 O-Ring Kit
The Milsig M17 G3 O-Ring Kit is a replacement seal kit made for the M17 G3 platform.
O-rings are small parts, but they play an important role in the marker.
They help seal the air system and prevent leaks.
Replacing worn seals can help restore reliable operation and improve air efficiency.
Product Features
- Made for the Milsig M17 G3
- Genuine Milsig replacement part
- Replacement internal O-rings
- Helps repair air leaks
- Helps maintain stable air pressure
- Useful for routine servicing
- Useful for preventative maintenance
- Suitable for HeatCore maintenance
- Compact spare-parts kit
- Manufacturer part number UMK-017
Why Replace O-Rings?
O-rings create seals inside the marker.
Over time, they can wear, flatten or become damaged.
A worn seal can cause:
- Air leaks
- Poor air efficiency
- Pressure loss
- Inconsistent cycling
- Reduced marker performance
Replacing damaged seals can help restore a proper air seal.
Made for the M17 G3
This kit is designed for the Milsig M17 G3.
The M17 G3 uses the Milsig HeatCore system.
The HeatCore is a fully mechanical and internally regulated system.
Its simple maintenance design makes it easy to access the main internal parts.
Kit Contents
The genuine Milsig spare-parts listing identifies this as the M17 G3 O-Ring Kit, part UMK-017.
Several Milsig parts suppliers list the kit as a 14-piece O-ring set.
Before publishing the exact quantity, check the physical Dye-Hard pack and confirm that it contains all 14 seals.
Do not substitute seals from another M17 generation unless the part size is confirmed.
Compatibility
This kit is intended for:
- Milsig M17 G3
- Compatible M17 HeatCore service applications where the same seals are specified
Do not assume that every M17 generation uses the same complete seal set.
The M17 A2 and older M17 platforms may use different parts in some areas.
Always confirm the marker generation before fitting replacement seals.
Specifications
- Brand: Milsig
- Model: M17 G3 O-Ring Kit
- Manufacturer Part Number: UMK-017
- Product Type: Maintenance / Seal Kit
- Accessory Type: O-Ring Kit
- Compatible Marker: Milsig M17 G3
- System: HeatCore
- Kit Size: 14 Pieces – verify physical pack
- Purpose: Internal Sealing / Maintenance
- Condition: New
Installation
Before replacing an O-ring:
- Degas the marker
- Remove the air source
- Clean the service area
- Identify the damaged seal
- Use the correct replacement size
Do not stretch an O-ring more than needed.
Take care not to cut or pinch the seal during installation.
Lubrication
Use only a suitable paintball marker lubricant or grease.
A small amount is normally enough.
Too much grease can collect dirt and may affect marker operation.
Always follow the Milsig maintenance instructions.
Care and Maintenance
Keep spare O-rings:
- Clean
- Dry
- Away from direct sunlight
- Away from excessive heat
- Away from sharp tools
Do not use a seal if it is:
- Cracked
- Flat
- Torn
- Hardened
- Damaged
Replace worn seals before they cause a larger air leak.
Compatible Dye-Hard Products
This kit is made for the Milsig M17 G3.
You can also pair it with other M17 G3 maintenance parts, magazines and accessories available from Dye-Hard.
Browse our Paintball Marker Accessories range for more marker spares and maintenance products.
Manufacturer
This O-ring kit is made by Milsig.
Visit the Milsig manufacturer website for M17 G3 parts, accessories and technical information.
Conclusion
The Milsig M17 G3 O-Ring Kit is a useful service kit for routine marker maintenance.
It provides replacement seals for the M17 G3 HeatCore system and can help repair leaks and worn sealing points.
Keeping a spare kit on hand can make maintenance faster and help keep the marker working reliably.
Frequently Asked Questions
Which marker does this kit fit?
It is made for the Milsig M17 G3.
What is the manufacturer part number?
The Milsig part number is UMK-017.
How many O-rings are included?
Milsig parts suppliers list UMK-017 as a 14-piece kit. Check the physical Dye-Hard pack before publishing the final quantity.
Can the kit help fix an air leak?
Yes. Replacing a worn or damaged seal may stop leaks caused by failed O-rings.
Should I lubricate the new O-rings?
Use a small amount of suitable marker lubricant and follow the Milsig maintenance instructions.
| Brand | Milsig |
|---|---|
| Accessory Type | O-Ring Kit |
| Internal System | HeatCore |
| Purpose | Internal Sealing / Maintenance |
| OEM Part | Yes |
| Condition | New |
Milsig Paintball
Milsig is known for MagFed paintball gear.
The brand makes paintball markers, magazines and parts. Its range includes the popular M17 and T17 models.
Milsig also makes air system parts and other useful gear.
Milsig MagFed Markers
Milsig offers several MagFed paintball markers.
The M17 and T17 are two well-known models. They use magazines to feed .68 calibre rounds.
Parts and extra magazines are also available for selected models.
Always check your marker model before you buy a new part.
Shop Milsig at Dye-Hard Paintball
Dye-Hard Paintball stocks a range of Milsig products in South Africa.
Looking for a new marker? Browse our Paintball Markers range to see what is in stock.
For more about the brand, visit the Milsig website.
Shop Milsig markers, parts and gear at Dye-Hard Paintball.


