The Fenix PD25R LED Rechargeable EDC Flashlight 800 Lumen is the long-awaited upgrade the fans of the PD25 have long been waiting for. This flashlight produces a maximum 800 lumens at 820ft (250m) of distance from an included 16340 rechargeable Li-ion battery or one CR123A. Use the tail cap switch for on/off and the momentary-on function while the side switch on the head is for mode selection. The two-position body clip hold this light securely to pocket or pack in a body that is only 3.6” long—perfect for everyday carry. IP68 rating makes it dust and waterproof. The Fenix PD25R rechargeable flashlight is perfect for on the job, outdoor adventures, or your daily EDC needs.

Specifications:

• Max Lumens: 800
• Max Runtime: 70 hours
• Lighting Modes: Five brightness levels plus strobe
• Bulb Type: Luminus SST20 LED
• Max Beam Distance: 820 feet (250 meters)
• Size: Length: 3.62” (92mm) Diameter: 0.94” (24mm)
• Weight: 2.75 oz. (78g) including battery
• Battery: One included 16340 rechargeable li-ion battery or one CR123A lithium battery
• Included: Fenix ARB-L16-700P rechargeable li-ion battery, USB Type-C charging cable, lanyard, 2 x spare O-rings, two-position body clip
• Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

More Information on the Fenix PD25R LED Rechargeable EDC Flashlight 800 Lumen:

• Luminus SST20 LED with a lifespan of 50,000 hours.
• Toughened ultra-clear glass lens with an anti-reflective coating.
• USB Type-C charging.
• Battery level indication and low voltage warning.
• Instant power activation with momentary tactical tail switch; simple output selection with side switch.
• Anti-roll and anti-slip body design; included two-position body clip.
• Reverse polarity protection, to protect from improper battery insertion.
• Made of durable A6061-T6 aluminium.
• Premium type HAIII hard-anodized anti-abrasive finish.

PD25R Operating Instructions

On/off 

The tail switch is the tactical switch and the side switch is the functional switch. Tap the tactical switch to momentarily turn on the PD25R, release the light will go out. Fully press the tactical switch to constantly turn on the light, press again to turn off the light.

Mode Switching

When the light is switched on, press and hold the functional switch for 0.5 seconds to enter strobe, single click again to turn back to general mode.

Output Selection

When the light is switched on, single click the functional switch to cycle through Turbo→ Eco→  Low→ Med→ High.

Intelligent Memory Circuit 

The light memorizes the last selected output excluding strobe. When turned on again the previously used output of general mode will be recalled.

Battery Specifications 

* 16340 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.

Battery Replacement

Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.

Charging the PD25R 

1. Switch off the light and loosen the light head to reveal the USB Type-C charging port and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
2. The indicator will display red while charging and will turn green when fully charged.
3. Once charging is completed, be sure to tighten the light head to maintain the dustproof and waterproof ability.

Note:

1. The normal charging time of the included Fenix ARB-L16-700P is approximately 2 hours from depletion to full charging.
2. Recharge a stored light every four months to maintain the optimum performance of the battery.
3. The Eco output is available while charging (press and hold the functional switch for 0.5 seconds), but the charging time will be prolonged.

Battery Level Indication 

Each time the light is turned on, the indicator will indicate the battery level and will last for 3 seconds.

• Green light on: saturated 100% – 85%
• Green light flashes: sufficient 85% – 50%
• Red light on: poor 50% – 25%
• Red light flashes: critical 25% – 1%

Note: This only works with Fenix ARB-L16-700P 16340 rechargeable Li-ion battery.

Intelligent Overheat Protection            

The light will accumulate a lot of heat when used at relatively high modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user to reselect the modes.

Low-voltage Warning 

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Eco output mode, the battery level indicator blinks red to remind you to timely recharge or replace the battery. Note: This only works with Fenix ARB-L16-700P 16340 rechargeable Li-ion battery.

Usage and Maintenance 

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using only a high-quality protected battery.
• If the light will not be used for an extended period, remove the battery for proper storage.
• Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: Poor battery level.
  Solution: Recharge or replace the battery.
  B: The contact or contact point of the battery or flashlight is dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Safe Use Warnings

• Do place this light out of the reach of children!
• Do NOT use the light in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the light or internal battery fails!
• This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
• Do NOT shine the light directly into the eyes of anyone!
• Turn off and lock the light or remove the battery from the light to prevent accidental activation when the light is placed in a closed and flammable environment such as pockets and backpacks!
• Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature!
• The LED of this flashlight is not replaceable; so the whole light should be replaced when the LED reaches the end of its life.

Conclusion for the Fenix PD25R LED Rechargeable EDC Flashlight 800 Lumen:

Concluding, the Fenix PD25R EDC flashlight impresses with 800 lumens and 820-foot beam. It’s versatile for EDC, outdoor use, and professional tasks. The tail cap and side switch ensure user-friendly operation. A two-position clip adds convenience. The IP68 rating enhances its durability. Accessories include a rechargeable Li-ion battery, USB Type-C cable, lanyard, spare O-rings, and body clip. Fenix Lighting USA’s Limited Lifetime Guarantee underscores quality. Overall, the Fenix PD25R rechargeable flashlight serves professionals and enthusiasts effectively.

View all our Flashlights and Torches here

Manufacturer: website