The Fenix C6 V3.0 LED Flashlight 1500 Lumen USB Rechargeable LED Torch is suitable for industrial maintenance and operations. It features USB Type-C charging with the included 2600mAh rechargeable Li-ion battery. Delivering an output up to 1500 lumens flashlight in turbo mode while throwing its beam a distance of up to 300 meters
Specifications:
- A Luminus SST40 LED with a lifespan of 50,000 hours.
- Included a 2600mAh rechargeable Li-ion battery.
- On/off, output selection with the side switch.
- USB Type-C rechargeable, 3 hours for full charging.
- Magnetic base for hands-free use.
- Battery level indication.
- Made of durable A6061-T6 aluminum.
- Premium type HAIII hard-anodized anti-abrasive finish.
- C6 SIZE
- Length: 133mm
- Head: 32mm
- Body: 23mm
- C6 WEIGHT 103g excluding battery
- C6 BATTERY TYPE One included 2600mA rechargeable li-ion battery
- INCLUDED 2600mA rechargeable li-ion battery, USB Type-C charging cable, lanyard, spare O-ring
Operation Instructions for Fenix C6 V3.0 LED Flashlight 1500 Lumen
On/off
- With the light switched off, press and hold the side switch for 0.5 seconds to enter general mode.
- With the light switched on, press and hold the side switch for 1.2 seconds to enter flash mode.
- With the light switched on, press and hold the side switch for 0.5 seconds to turn off the light.
Mode Switching
With the light switched on, press and hold the side switch for 1.2 seconds to switch between general mode and flash mode.
Output Selection
- In general mode, single click the side switch to cycle through Eco→Low→Med→High→Turbo.
- In flash mode, single click the side switch cycle through Strobe→SOS.
Intelligent Memory Circuit
The light memorizes the last selected output on general mode. When turned on again the previously used output will be recalled. Each time the light will enter strobe when flash mode is selected.
Lock/Unlock
- Lock: with the light switched off, double click the switch within 0.5 seconds to lock the light, the light will blink twice on Eco to indicate locked status.
- Unlock: with the light locked, double click the switch within 0.5 seconds, the light will be unlocked and activated on Eco.
*In locked status, clicking or pressing the switch will activate 2 one-second blinks on Eco to indicate locked status.
Battery Specifications
* 18650 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.
Battery Replacement
Unscrew the tail cap and insert the battery with the anode side (+) towards the light head, then screw the tail cap back on.
Charging
- Reveal the USB Type-C charging port and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
- The normal charging time is approximately 3 hours from depletion to full charging with the light switched off. When charging, the flashlight can be normally used on Eco mode, but charging time will be prolonged.
- The indicator will display red while charging and will turn green when fully charged.
- Once charging is completed, be sure to replace the USB cap to maintain the dustproof and waterproof ability.
* The charging input is 5V/2A, the adapter and mobile power bank of this specification can be used to charge the flashlight.
* Recharge a stored headlamp every four months to maintain optimal Li-ion battery performance.
Battery Level Indication
With the light switched off, single click the switch to check the battery status, the indicator will last for 3 seconds.
- Green light on: saturated 100% – 85%
- Green light flashes: sufficient 85% – 50%
- Red light on: poor 50% – 25%
- Red light flashes: critical 25% -1%
Note: This only works with Fenix ARB-L18-3500 battery.
Intelligent Overheat Protection
The light will accumulate a significant amount of heat when used at a relatively high mode for extended periods. Consequently, when the light’s temperature reaches 60°C or above, it will automatically step down a few lumens to effectively reduce the temperature and prevent overheating. However, once the temperature drops below the threshold of 60°C, the user will regain the ability to reselect the desired mode. This intelligent thermal management system ensures optimal performance and safeguards against potential overheating issues.
Intelligent Downshift
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco mode is reached.
Low-voltage Warning
When the voltage remains low in Eco mode, the light blinks three times every five minutes to remind you to timely recharge or replace the battery.
Note: This only works with Fenix ARB-L18-3500 battery.
Usage and Maintenance
- Disassembling the sealed head can cause damage to the light and will void the warranty.
- Fenix recommends using only a high-quality protected battery.
- If the light will not be used for an extended period, remove the battery for proper storage.
- Lock the light or remove the battery to prevent accidental activation during storage or transportation.
- Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
- Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Recharge battery.
B: The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
Warning
- The flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone’s eyes.
- This flashlight will accumulate a lot of heat when used for extended periods, resulting in a high temperature of the flashlight Pay attention to safe use to avoid scalding.
- Do not shine an object at close range, to avoid burning the object or causing danger due to high temperature.
- The LED of this flashlight is not designed to be replaceable; so the entire light should be replaced when the LED reaches the end of its life.
- If any changes occur to the information provided in this manual, the new version of the manual will take precedence. If you possess an older version of the included user manual, it implies that we will not send a new manual.
Conclusion for the Fenix C6 V3.0 LED Flashlight 1500 Lumen:
When used at high mode for long periods, the light generates significant heat. If the temperature exceeds 60°C, it reduces lumens to cool down. Once below 60°C, users can select modes freely. This intelligent thermal management system prevents overheating and maintains performance.
View all our Flashlights and Torches here
Manufacturer: website
