Fenix BC26R LED Bike Light + BC05R V2.0 1600 Lumen – The Fenix BC26R LED Bike Light 1600 Lumen is a lightweight, bike light built to keep you rolling long into the night. This bike light features an included rechargeable 5000mAh li-ion battery that blasts up to 1600 lumens and allows for longer runtimes—up to 65 continuous hours on the lowest brightness level. The 100° floodlight beam offers a wider field of view making it much easier to see while turning corners. Attach and remove the bike light quickly with the included quick-release bike mount. And never fear the elements with dustproof, waterproof and shockproof design.

Information of the Fenix BC26R LED Bike Light 1600 Lumen:

Specifications:

• Max Beam Distance: 554 feet (169 meters)
• Max Runtime: 65 hours
• Lighting Modes: 4 brightness levels plus flashing mode
• Max Lumens: 1600
• Bulb Type: Luminus LED
• Size: Length: 4.45” (113mm) Width: 1.14” (29mm) Height: 1.06” (27mm)
• Weight: 5.47 oz. (155g) including mount and battery
• Battery: One rechargeable 21700 li-ion battery (included). Compatible with an 18650 Li-ion battery with an ALF-18 battery holder.
• Included: ARB-L21-5000 Li-ion battery, USB Type-C charging cable, quick-release bike mount, spare O-ring
• Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

Additional Features:

• Includes a 5000mAh Li-ion battery and is compatible with a 18650 Li-ion battery (with an ALF-18 battery holder).
• USB Type-C charging.
• Quick-release design, two-step assembly and disassembly.
• Easy and fast operation with a single switch.
• Boot-up battery level indication and low-voltage warning.
• *Please note this light requires a wall charger that is at least 2 AMPS for proper charging.
• A Luminus LED with a lifespan of 50,000 hours.

Operating Instructions

On/off Press and hold the side switch for 0.5 seconds to turn on/off the light.

Output Selection 

With the light switched on, single click the switch to cycle through Low→Med→High→Turbo.

Flash Mode 

With the light switched on, double click the switch to enter flash mode, single click again to exit flash mode and return to the previously used mode.

Intelligent Memory Circuit 

The bicycle light memorizes the last selected output excluding Flash mode. When turned on again the previously used mode will be recalled.

Battery Specifications 

Warning: *21700Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Using only quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.

Battery Replacement 

Unscrew the tail cap and insert the battery following the polarity marks, then screw the cap back on.

Charging the BC26R

1. Switch off the light and open the USB cap to reveal the USB Type-C charging port and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
2. The indicator will display red while charging and will turn green when fully charged.
3. Once charging is completed, be sure to tighten the light head to maintain the dustproof and waterproof ability.

Note:

1. The normal charging time of the included Fenix ARB-L21-5000is approximately 4 hours from depletion to full charging.
2. Recharge a stored light every four months to maintain the optimum performance of the battery.
3. The Low output is available while charging, but the charging time will be prolonged.

Note: This only works with Fenix ARB-L21-5000 rechargeable Li-ion battery.

Battery Level Indication 

Each time the light is turned on, the indicator will indicate the battery level, and will stay on continuously, letting you always know your battery level as you ride.

• Green light on: saturated 100% – 85%
• Green light flashes: sufficient 85% – 50%
• Red light on: poor 50% – 25%
• Red light flashes: critical 25% – 1%

Note: This only works with Fenix ARB-L21 series 21700 rechargeable Li-ion battery.

Intelligent Overheat Protection 

The light will accumulate a lot of heat when used at relatively high modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user to reselect the modes.

Low-voltage Warning 

When the voltage level drops below the preset level, the bicycle light is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output, the battery level indicator constantly blinks red to remind you to recharge or replace the battery. Note: This only works with Fenix ARB-L21 series 21700 rechargeable Li-ion battery.

Usage and Maintenance for the BC26R Bike Light

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using only a high-quality protected battery.
• If the light will not be used for an extended period, remove the battery for proper storage.
• Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: Poor battery level.
  Solution: Recharge or replace the battery.
  B: The contact or contact point of the battery or bicycle light is dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Warning

• The bicycle light is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone’s eyes.
• This bicycle light will accumulate a lot of heat when used for extended periods, resulting in a high temperature of the bicycle lights hell. Pay attention to safe use to avoid scalding.
• Do not shine an object at close range, to avoid burning the object or causing danger due to high temperature.
• The LED of this bicycle light is not replaceable; so the entire light should be replaced when the LED reaches the end of its life.
• If any of the information provided in this manual is changed, the new version of the manual shall prevail; if your included user manual is an old one, it acquiesces that we won’t send a new manual.

Information of the Fenix BC05R V2.0 LED Rechargeable Bike Taillight 15 Lumen:

The Fenix BC05R V2.0 LED Rechargeable Bike Taillight 15 Lumen ensures cyclist safety with up to 15 lumens of red signalling light. It offers six modes, including various flash speeds and brightness levels. The built-in 400mAh Li-polymer battery provides up to 120 hours of runtime in low-fast flash mode, lasting two months on a single charge for a 2-hour daily commute. Fast charging is possible via the Type-C interface. With the body clip included, you can use it as a headlamp, chest lamp, or backpack light. Rated IP66 rainproof and dustproof, this taillight enhances bicycle commute safety.

Specifications:

• Max Lumens: 15
• Lighting Modes: 2 Brightness levels including slow flash and fast flash
• Size: Length: 2.01” (51mm) Width: 0.87” (22mm) Height: 0.87” (22mm)
• Max Beam Distance: 164 Feet (50 Meters)
• Weight: 0.99 oz. (28g) including battery
• Battery: Built-in 400mAh li-polymer battery.
• Included: Type-C charging cable, bicycle mounting strap, body clip
• Max Runtime: 120 Hours
• Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

Additional Features of the Fenix BC05R V2.0 LED Rechargeable Bike Taillight 15 Lumen

• 15 lumens maximum output; 50 meters alerting distance.
• 180° lighting angle.
• 5 red light LED.
• Built-in 400mAh Li-polymer battery.
• USB Type-C charging port.
• Ultra-compact and fashionable appearance.
• Battery level indication for remaining battery level checking.
• Single switch for easy and fast control.
• Matched with the body clip, can be used as a backpack light, or chest light.

Operating Instructions

On/off 

Press and hold the switch for 0.5 seconds to turn on/off the light.

Output Selection 

With the light switched on, single click the switch to cycle through Low→Low Flash (slow)→Low Flash (fast)→High→High Flash (slow)→High Flash (fast).

Charging Operation:

Remove the dust cover of the bicycle taillight to reveal the charging port, and plug the USB Type-C end of the charging cable into the light’s charging port, then connect the other end of the charging cable to a USB power adapter.

 Indication:

The indicator will display red while charging and will turn green when fully charged.

Battery Level Indication 

With the light switched off, single click the switch to check the battery status, the indicator in the switch will last for 3 seconds.

• Green light on: saturated 100% – 85%
• Green light flashes: sufficient 85% – 50%
• Red light on: poor 50% – 25%
• Red light flashes: critical 25% – 0%

Low-voltage Warning 

When the voltage level drops below 25% of the total level, the battery level indicator blinks red to remind you to timely recharge the battery. To ensure normal use, the light will not turn off automatically and will work till the battery level runs out.

Mounting Instruction Mounting strap: 

First loop the mounting strap (without LOGO) around the small opening of the taillight, and place the taillight on the seat post (face up), then loop the other end of the mounting strap (with LOGO) around the other small opening of the taillight, adjust as the size of the seat post.

Body clip: 

Keep the body clip and the taillight both face up, push the small opening on both sides of the taillight downward to the spout of the body clip.

Note: The bicycle light is applicable to bike seat post diameters between 20mm-35mm.

Usage and Maintenance for the BC05R V2.0

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Recharge the light timely when the battery level is critical, for future use.
• Recharge a stored light every 3 months to maintain optimal battery performance.
• Periodic cleaning improves the light’s performance especially when the light flickers, shines intermittently or even fails to illuminate for the following reason:
  A: Poor battery level.
  Solution: Recharge or replace the battery.

If the above methods don’t work, please contact your authorized distributor.

 Warning

• The taillight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the light directly into anyone’s eyes.
• The LED of this taillight is not designed to be replaceable; so the entire light should be replaced when the LED reaches the end of its life.
• If any of the information provided in this manual is changed, the new version of the manual shall prevail; if your included user manual is an old one, it acquiesces that we won’t send a new manual.

View all our Flashlights and Torches here

Manufacturer: website