T17 / M17 G3 Magazine | 0.68 Calibre | 18–19 Round | Milsig
R995.00
In stock
Milsig T17 / M17 G3 Magazine
The Milsig T17 / M17 G3 Magazine is the standard high-capacity magazine designed for Milsig’s newer T17 and M17 G3 platforms.
It holds approximately 18 to 19 compatible 0.68 calibre projectiles and supports both standard round paintballs and compatible shaped projectiles.
The compact headless design is different from the older square-head M17 magazine system and is built specifically for the newer G3-generation platform.
Designed for T17 and M17 G3
This magazine is designed specifically for:
- Milsig T17
- Milsig M17 G3
Both platforms use the same new-generation magazine system.
The M17 G3 was redesigned around a flatter, headless magazine that improves fitment and durability compared with the older M17 A1 and A2 magazine design.
18–19 Round Capacity
The magazine has a stated capacity of:
18–19 rounds
Actual usable capacity may vary slightly depending on the projectile shape and how the magazine is loaded.
For reliable feeding, avoid forcing an additional projectile into a magazine that is already under excessive spring pressure.
Compatible with Round and Shaped Projectiles
The magazine is designed for compatible 0.68 calibre projectiles, including:
- Standard round paintballs
- Compatible shaped projectiles
- First Strike-style projectiles where the marker and projectile are approved for use
- Other suitable .68 calibre ammunition
Always check projectile fit before loading.
Do not force damaged or oversized rounds into the magazine.
Separate Winder and Ball Release
The magazine uses a separate winder and ball-release system.
This allows the spring tension and projectile retention functions to be controlled independently.
The design helps make loading and unloading easier while keeping the rounds under suitable spring pressure during use.
Not Compatible with Older Milsig Magazines
This magazine is not compatible with older Milsig platforms such as:
- M17 A1
- M17 A2
- K-Series
- M-Series
- SMG
- PMC
These markers use a different magazine design.
Do not assume that all M17 magazines are interchangeable.
New-Generation Headless Design
The T17 / M17 G3 magazine has a flatter top profile than the older square-head magazines.
This updated design was introduced with the G3-generation platform and is shared between the T17 and M17 G3.
The result is a more compact magazine interface that matches the redesigned magwell on these markers.
Product Features
- Genuine Milsig magazine
- Made for T17 and M17 G3
- 0.68 Calibre
- 18–19 round capacity
- Compatible with round projectiles
- Compatible with shaped projectiles
- Separate winder and ball release
- New-generation headless design
- Detachable magazine
- Direct-fit replacement
- Manufacturer part number MG-011
Specifications
- Brand: Milsig
- Model: T17 / M17 G3 Magazine
- Product Type: Paintball Magazine
- Magazine Type: Detachable MagFed Magazine
- Marker Model: Milsig T17 / M17 G3
- Calibre: 0.68 Calibre
- Capacity: 18–19 Rounds
- Projectile Compatibility: Round / Shaped
- Winder: Separate
- Ball Release: Separate
- Magazine Generation: G3 / T17
- MPN: MG-011
- Condition: New
Loading the Magazine
Make sure the marker is safe before handling or changing the magazine.
Use the magazine winder as required to reduce spring tension while loading.
Load compatible 0.68 calibre projectiles carefully and make sure each round sits correctly.
Do not force an extra projectile into the magazine if it is already at full tension.
Once loaded, restore the correct spring tension before inserting the magazine into the marker.
Care and Maintenance
Keep the magazine clean and dry.
Remove dirt, paint and broken projectile material after use.
Pay particular attention to:
- Feed lips
- Winder mechanism
- Ball release
- Magazine spring
- Internal feed path
Do not use the magazine if it is cracked, badly worn or no longer feeds reliably.
Manufacturer
The T17 / M17 G3 Magazine is made by Milsig under manufacturer part number MG-011.
Visit the Milsig manufacturer website for more information about the T17, M17 G3 and compatible accessories.
Find More Milsig Accessories
Browse Dye-Hard Paintball’s Milsig and Paintball Magazine ranges for T17 and M17 G3 magazines, drum magazines, hoppers and other compatible parts.
Conclusion
The Milsig T17 / M17 G3 Magazine is the correct standard magazine for Milsig’s newer G3-generation platforms.
Its 18–19 round capacity, support for round and shaped 0.68 calibre projectiles, and separate winder and ball-release system make it a practical spare or replacement for both the T17 and M17 G3.
Because it uses the newer headless magazine design, it should not be confused with older M17 A1 or A2 magazines.
Frequently Asked Questions
How many rounds does the magazine hold?
It holds approximately 18–19 rounds.
Which markers does it fit?
It fits the Milsig T17 and Milsig M17 G3.
Does it fit the M17 A2?
No. The M17 A2 uses the older square-head magazine design.
Can it use shaped projectiles?
Yes. It is designed for compatible 0.68 calibre round and shaped projectiles.
What is the manufacturer part number?
The Milsig part number is MG-011.
| Brand | Milsig |
|---|---|
| Colour | Black |
| Magazine Capacity | 18–19 rounds |
| Calibre | 0.68 Cal |
| Compatibility | Defense Innovation DI68, Milsig |
| Product Type | Defense Launcher Accessories, Paintball Magazines, Paintball Marker Accessories |
| Magazine Type | Detachable MagFed Magazine |
| Capacity | 18–19 Rounds |
| Projectile Compatibility | Round / Shaped |
| Winder | Separate |
| Ball Release | Separate |
| Magazine Generation | G3 / T17 |
| Condition | New |
Milsig Paintball
Milsig is known for MagFed paintball gear.
The brand makes paintball markers, magazines and parts. Its range includes the popular M17 and T17 models.
Milsig also makes air system parts and other useful gear.
Milsig MagFed Markers
Milsig offers several MagFed paintball markers.
The M17 and T17 are two well-known models. They use magazines to feed .68 calibre rounds.
Parts and extra magazines are also available for selected models.
Always check your marker model before you buy a new part.
Shop Milsig at Dye-Hard Paintball
Dye-Hard Paintball stocks a range of Milsig products in South Africa.
Looking for a new marker? Browse our Paintball Markers range to see what is in stock.
For more about the brand, visit the Milsig website.
Shop Milsig markers, parts and gear at Dye-Hard Paintball.


