IntruBuster Gen1 & Gen2 Power Kit | 50–100J | .68 | Mercury Rise
R3,000.00
In stock
Mercury Rise IntruBuster Gen1 & Gen2 50–100J Power Kit
The Mercury Rise IntruBuster Gen1 & Gen2 50–100J Power Kit is a tuning chamber upgrade for compatible .68 calibre IntruBuster and Pistelle X-68 launchers.
Instead of offering only one chamber size, the kit gives you two different configurations so you can choose the setup that best suits your launcher and intended use. The shorter chamber is rated at 50–70 Joules, while the longer chamber is rated at 80–100 Joules.
These figures are supplier-rated performance ranges rather than guaranteed results, because actual output will always depend on the complete launcher, gas system, projectile and operating conditions.
Made for IntruBuster Gen1 and Gen2
The kit is designed for the Mercury Rise IntruBuster Gen1 and Gen2, while MCS also lists compatibility with the Pistelle X-68 Gen1 and Gen2.
This makes the kit useful across several closely related .68 calibre platforms, but customers should still confirm the exact launcher and generation before ordering because not every component is interchangeable between Gen1, Gen2 and Pistelle models.
You can view the Mercury Rise IntruBuster Gen2 on Dye-Hard or browse all Mercury Rise products for compatible launchers, service parts and accessories.
Two Chamber Lengths in One Kit
The power kit includes two chamber-length options, giving you a choice between a shorter and a longer tuning setup.
The 25 mm / 1-inch configuration is rated at 50–70 Joules, while the 50 mm / 2-inch configuration is rated at 80–100 Joules.
Having both options in one kit gives the user more flexibility without needing to buy a completely separate tuning system for each performance range.
How the Tuning Chamber Works
The tuning chamber increases the amount of gas available to the launcher before each shot, which can change how much energy is transferred to the projectile.
This does not mean the same chamber will produce exactly the same result in every launcher. Gas pressure, projectile weight, barrel fit, seal condition and temperature can all affect the final output.
The main factors include:
- Gas pressure
- Projectile weight
- Projectile size
- Barrel setup
- Temperature
- Seal condition
- Launcher condition
- Other fitted parts
For this reason, two launchers fitted with the same kit may still produce different results.
CO₂ and HPA Compatibility
The kit can be used with compatible CO₂ and HPA setups, provided the correct tank, regulator, fittings and launcher components are used.
A standard CO₂ configuration can still be used where the launcher supports it, while HPA gives the user another option when a refillable air system is preferred.
If you are building an HPA setup, browse Dye-Hard’s Gas & Air Systems range for tanks, regulators, adapters and related parts.
You can also view Frog Air HPA products on Dye-Hard for compatible HPA options.
Recommended HPA Pressure
MCS recommends keeping the HPA regulator output around 850–900 PSI where possible.
This range offers a good balance between performance and reliability, while also helping reduce unnecessary stress on seals and O-rings.
Higher pressure does not automatically mean better performance, and the pressure rating of the tank, regulator, fittings and launcher must always be respected.
Stainless Steel and 6061 Aluminium Construction
The main tuning chamber adapter is made from stainless steel, while the supporting components are made from 6061 aluminium.
This gives the kit a strong and durable build without adding unnecessary weight to the launcher.
The kit includes:
- Stainless steel tuning chamber adapter
- 6061 aluminium tuning chamber plug
- 6061 aluminium tuning expansion
- 6061 aluminium locking adapter
The combination of stainless steel and aluminium gives the system a solid feel while keeping the complete setup relatively compact.
Understanding the 50–100J Rating
The product is described as a 50–100J Power Kit, but this should not be read as a promise that every launcher will reach 100 Joules.
The shorter setup carries a supplier rating of 50–70J, while the longer setup carries a rating of 80–100J.
Actual energy can still change depending on the projectile, gas pressure, temperature, barrel setup and general condition of the launcher.
For this reason, the correct catalogue wording should remain:
Performance Increase: Setup Dependent
This keeps the advertised performance range visible without suggesting that every installation will produce the same result.
Product Features
- Designed for Mercury Rise IntruBuster Gen1 and Gen2
- Also listed for Pistelle X-68 Gen1 and Gen2
- .68 calibre platform
- Two chamber-length options
- 25 mm short configuration
- 50 mm extended configuration
- 50–70J supplier-rated short setup
- 80–100J supplier-rated extended setup
- Compatible with suitable CO₂ and HPA systems
- Stainless steel main chamber adapter
- 6061 aluminium support components
- Durable metal construction
- Setup-dependent final performance
Specifications
- Brand: Mercury Rise
- Model: IntruBuster Gen1 & Gen2 50–100J Power Kit
- Product Type: Tuning Chamber Power Kit
- Accessory Type: Gas-System Performance Upgrade
- Calibre: .68 Calibre
- Primary Compatibility: Mercury Rise IntruBuster Gen1 / Gen2
- Secondary Compatibility: Pistelle X-68 Gen1 / Gen2
- Short Setup Length: 25 mm / 1 Inch
- Short Setup Rating: 50–70 Joules
- Extended Setup Length: 50 mm / 2 Inches
- Extended Setup Rating: 80–100 Joules
- Power Source: CO₂ / HPA
- Recommended HPA Output: Approx. 850–900 PSI
- Main Adapter Material: Stainless Steel
- Plug Material: 6061 Aluminium
- Expansion Material: 6061 Aluminium
- Locking Adapter Material: 6061 Aluminium
- Performance Increase: Setup Dependent
- Condition: New
Package Includes
The kit includes:
- 1 × Stainless Steel Tuning Chamber Adapter
- 1 × 6061 Aluminium Tuning Chamber Plug
- 1 × 6061 Aluminium Tuning Expansion
- 1 × 6061 Aluminium Locking Adapter
The launcher, HPA tank, regulator and CO₂ capsules are not included.
Compatibility
Although this kit is listed for several related platforms, customers should not assume that every IntruBuster and Pistelle component can be swapped between models.
Gen1, Gen2 and Pistelle launchers can differ in important areas, so the exact model and generation should always be confirmed before ordering.
If you are unsure which version you have, contact Dye-Hard with the launcher model and generation so the correct compatibility can be checked.
Warranty Notice
This is a performance-tuning product, so fitting it may affect the original manufacturer warranty.
Before installing the kit, check the warranty terms for your launcher and make sure you understand how performance changes may affect service or warranty support.
After installation, inspect the launcher regularly for gas leaks, seal wear or any other signs of added stress.
Care and Maintenance
Keep the tuning chamber and all gas-system parts clean and dry, especially around the seals, threads and pressure-bearing surfaces.
Inspect the system regularly for:
- Gas leaks
- Worn O-rings
- Damaged seals
- Damaged threads
- Loose fittings
- Corrosion
- Unusual pressure loss
Only use seals and lubricants that are suitable for the gas system fitted to the launcher.
Do not use damaged pressure-bearing components.
Manufacturer and Supplier Information
The kit is sold for the Mercury Rise IntruBuster platform and is also listed by MCS / Modern Combat Sports for compatible IntruBuster and Pistelle X-68 models.
Visit the Mercury Rise website for more information about the IntruBuster range.
MCS also lists the IntruBuster Gen1 & Gen2 50–100J Power Kit with the same chamber lengths, materials and rated performance ranges.
Dye-Hard Paintball is an official, authorised and exclusive South African distributor of Mercury Rise products, including the Mercury Rise IntruBuster Gen 2, Defense Innovation products, and the Pistelle X-68. We supply these products directly to customers and resellers throughout South Africa.
Find More IntruBuster Accessories
Browse Dye-Hard’s Defense Launcher Accessories range for compatible barrels, magazines, seals, gas-system parts and other upgrades.
You can also browse all Mercury Rise products on Dye-Hard for more IntruBuster parts and service items.
For HPA setups, view Dye-Hard’s Gas & Air Systems range.
Conclusion
The Mercury Rise IntruBuster Gen1 & Gen2 50–100J Power Kit gives users two tuning chamber lengths in one package, making it easier to choose a setup that matches the launcher and intended performance range.
The shorter 25 mm chamber is rated at 50–70J, while the longer 50 mm chamber is rated at 80–100J. Because the final result depends on the gas system, projectile, barrel setup and launcher condition, these figures should be treated as supplier-rated ranges rather than guaranteed output.
With stainless steel and 6061 aluminium construction, support for compatible CO₂ and HPA setups, and compatibility across several related IntruBuster and Pistelle platforms, the kit provides a flexible tuning option for supported .68 calibre launchers.
Frequently Asked Questions
Which launchers does this kit fit?
It is listed for Mercury Rise IntruBuster Gen1 and Gen2, as well as Pistelle X-68 Gen1 and Gen2.
Does the kit always produce 100 Joules?
No. The 50–100J figures are supplier-rated ranges, while actual output depends on the complete launcher and gas setup.
Can the kit be used with CO₂ and HPA?
Yes, provided the launcher and gas-system components are compatible with the chosen setup.
What materials are used?
The main tuning chamber adapter is stainless steel, while the plug, expansion and locking adapter are made from 6061 aluminium.
Can fitting the kit affect the warranty?
Yes. Performance modifications may affect the original manufacturer warranty, so the warranty terms should be checked before installation.
| Colour | Black |
|---|---|
| Brand | Mercury Rise |
| Product Type | Defense Launcher Accessories |
| Compatibility | IntruBuster Gen2 |
| Secondary Compatibility | Pistelle X-68 Gen1 / Gen2 |
| Configuration | Adjustable / Two-Stage |
| Short Configuration Length | 25mm / 1 Inch |
| Extended Configuration Length | 50mm / 2 Inches |
| Short Configuration Rating | 50–70 Joules |
| Extended Configuration Rating | 80–100 Joules |
| Power Source | CO₂ / HPA |
| Chamber Adapter Material | Stainless Steel |
| Expansion Material | 6061 Aluminium |
| Plug Material | 6061 Aluminium |
| Locking Adapter Material | 6061 Aluminium |
| Internal Modification | Not Required |
| Condition | New |
| Accessory Type | Gas-System Performance Upgrade |
| Calibre | 0.68 Cal |
Mercury Rise
Mercury Rise makes launchers and parts.
The IntruBuster Gen2 is one of its main products. It is small, easy to use and made for .68 calibre rounds.
The brand also makes spare magazines and other parts.
IntruBuster Gen2
The IntruBuster Gen2 is a compact launcher.
It uses a six-round magazine. Power comes from a 12g CO2 cartridge.
The launcher also has rails. These can be used to fit suitable lights and sights.
Spare magazines and other parts are also available.
Mercury Rise at Dye-Hard
Dye-Hard is an official and exclusive South African distributor of Mercury Rise products.
We supply genuine products to buyers and resellers across South Africa.
Want to see more? Browse our Defense Launchers range to see what is in stock.
You can also visit the official Mercury Rise website to learn more about the brand.
Shop Mercury Rise products, parts and gear at Dye-Hard.
Dye-Hard Paintball is an official, authorised and exclusive South African distributor of Mercury Rise products, including the Mercury Rise IntruBuster Gen 2, Defense Innovation products, and the Pistelle X-68. We supply these products directly to customers and resellers throughout South Africa.

